EXECUTIVE PAGESProcessing Sequence for High Twist Filament Saree - 60 Grams Polyester
Fabric Details : Warp - 50/24/2600 Twist SD Filament S/Z; Weft - 50/24/2600 Twist SD Filament S/Z
Reed - 96/2; Pick - 80; Width - 56; Weight - 6.800
Process Sequence :
Druming ( 3600 mts)
Hydros:500 gms (Optional)
Lecocol CLFD :500 gms
o
(80 C for 30 min)
Drain
Levocol JD : 1500 gms
Levocol CESR 1500 gms
o
130 C for 90 min at 2.75-3.0 kg pressure
Drain and cold rinse (No foreign impurity should remain on fabric)
Heat setting on Stenter
Soft water
o
At 190 C/42” width/20% shortage/speed 40 mts/min
Weight Reduction in Softlina (Approx : 18 - 20% or as per requirement)
Drain
Hot wash (30 min)
Drain
Jet Dyeing M/c. Neutralisation
Acetic Acid
Oxalic acid
Levocol CANFinally
o
Print – Dry at 140 C – Loop/Fixation at 170 C for 8 mins.
Reduction Clearing and Hydro Extraction
as per standard procedure
Finishing on Stenter :
Levofin MF - 1.0 % + Levofin LF - 0.5 %
o
175 C for 30 secs.
Zero – Zero Finish and Folding.o
:
:
:4000 gms
750 gms
500 gms
o
90 C for 30 min
Drain
Whitening/Dyeing
Acetic Acid (98%) : 1000 gms (pH = 4)
Levocol CDFT : 350 gms
Levocol CWS : 200 gms
Coralene Colour/White R (As Required)
o
At 130 C for 30 min.
Drain
This information is provided in good faith, to the best of
our knowledge and without liabilitiesCold rinse
Levocol 4398 : 1500 gms
This page is sponsored by : Colourtex Industries Pvt. Ltd.
Heat Setting for PrintingI
Levocol 4398 : 500 gms
Levocol CAN: 100 gms for 100 lits
o
190 C for 30- 45 Sec. Width – 45"Email : [email protected]
Website : www.colourtex.co.in
Colourtex Industries Pvt. Ltd. Surat
NCM-OCTOBER 2021
26